Blown In Insulation in Spring, TX
If you need insulation in your attic space, there are few products that are easier to install than blown in insulation in Spring, TX. It’s cost effective, and super easy to install. Trying to use rolled batt style fiberglass insulation is a difficult process.
For example, having to haul insulation through a narrow hatch makes it hard work. The speed at which your attic insulation improves is greatly increased with the use of blow-in insulation. Within an hour or two, an installation specialist can install insulation in the attic using a hose to spray a layer of insulation all over the floor. To get more insulation in the stud cavities, one needs to either remove complete wall surfaces and install facing fiberglass batts, or to install blow-in insulation.
Homeowners like blow-in cellulose insulation because it’s green, produced completely of recycled paper and wood components.
Attic Installation
Blow-in insulation installation teams often consist of two people, one of whom works in the attic. In the attic, one worker uses a blower hose to blow insulation (which has been fluffed up) in every direction to fill any open space or gaps. The insulation settles around any possible impediments. In order to have bags or bales of cellulose blow through the hoses, one worker uses the blower unit from a room inside the home, and the other worker runs the blower unit from the outside of the house and controls the amount of air to keep the hoses blowing. A blanket of insulation will be applied, achieving the appropriate R-value. The workers will carry out this task together. Since blow-in insulation often gets laid on top of fiberglass, it is necessary to vacuum the attic first so the blow-in insulation can stick.
When someone mentions “blow-in insulation,” he or she is describing an insulation method that consists of any insulating material that may be blown into spaces and laid across the floor of an attic with the help of a machine. Cellulose material is the most commonly utilized material for blow-in applications, even though there are many other materials to employ such as styrofoam pellets or loose fiberglass fibers.
Blown In Insulation vs. Fiberglass Batts
On a basic level, blown in insulation is very similar to fiberglass batts in relation to the cost. But, here are a few of the things to keep in mind. While it is possible to install blown in insulation yourself, it is much easier for a company like Spring Insulation to come do the work for you. Without a proper understanding of the process, it can be difficult and confusing. When it comes to cost, you can expect to pay somewhere from $600-$1200 per 1,000 sq ft. R-value of blown in insulation is about 3.2 to 3.8 per inch, where fiberglass batts are about 3.7 per inch. While both blown in insulation and fiberglass batts are suitable options, installing fiberglass batts in an attic is very difficult. Blown in insulation make the process quick, with a typical install time of a couple of hours on a 2,000 sq ft home in Spring, TX.